Do not print on edges of plastic, metal, glass, or paper, as this can cause damage to the screen and mesh. A layer of protective film is applied to the friction area under the screen to prevent it from being worn. Do not press the mesh along the frame and the glued area, as this will cause the mesh to come off the mesh frame. Adhesives have strong side-adhesion capabilities, but when subjected to vertical tension, their adhesion is greatly reduced. The tape can be carefully glued on the two sides of the mesh with a tape, such as the golden Mylar. , Paste the wire mesh: If a small hole or crack appears on the wire mesh cloth, it can be glued with a golden Mylar film. This will not affect the printing effect of the mesh cloth.