EISHO is committed to providing differen types of acrylic hangers for pant, trouser, skirts and other bottom clothings. Our acrylic hangers is mainly designed for the close shops, wedding shops, or the high-end requirement displaces. Because Acrylic Hanger serve as a foil for the garment's brilliance.
All these hangers are made from acylic, which with crystal transparency, transmittance of more than 92%, soft light, clear vision. And these acrylic materials used in clothes hangers, showing ideal surface decoration effect.
Acrylic Hangers are featured by their clips, clamps, and hooks, creating the special structure for the top or bottom clothes items. As a professional hangers manufacturer, optional clips, clamps, and hooks are ready for our customers all the time. As to the metal parts, chrome, electrophoresis and pearl nickel are the common processes.
As a composite material made of paper, aluminum foil and polyethylene plastic, we have 6 layers of milk drink paper packaging such as Tetra Pak, which is about 75% of pulp, aluminum and plastic. , 5%, and 20%. Such a combination can block air and light as much as possible, making it difficult for milk or beverages to degenerate.
Aluminum and plastics are just the best raw materials for the color plate of the board house.
The accumulated milk beverage paper packaging is first crushed into tiny particles of 1 to 3 mm (the oversized material is not firm and is too small to have any tension), and then the particles are heated with steam until the plastic inside melts, and The fibers in the package are firmly bonded. After finishing, give the particles a "sauna" (high temperature hot pressure), then wash a "cold water bath" (water pipe emptied and condense), and fluffy piles of confetti just become stiff and stiff.
If your knife is enough to force, evenly draw this piece of sheet, and it is a good raw material. Due to the absence of additional adhesives and chemical raw materials during the entire process, the panels manufactured in this way do not contain pitted formaldehyde.
In fact, there are 2,000 benches in the Shanghai World Expo Park in 2010. This is certainly the case. To achieve the industrial level, home DIY is still too primitive. In a modern production line, the recycling factory produces a long bench of 1.2 meters in length and 0.4 meters in width, which needs to consume 856 250 ml milk beverage paper packages.
Through the recycling channel, the recycling factory can also turn milk beverage paper into toilet paper—a large quantity of the sorted paper is sent to the hydraulic pulper. Once the impeller starts to rotate, the slurry in the tank will follow. Axial center suction, thrown from the high speed of the circle, forming a violent turbulent cycle. Due to the tearing of the impeller wing and the interaction of the different speeds of the slurry flow layer, a huge friction effect is generated, so that the slurry is strongly desorbed in the wet state to achieve the effect of separating the fibers. After the separation of plastics, pulp, and aluminum, the slag removal, screening, washing, and extruding of water through the pulp, and the transformation of the packaging of milk beverage papers were also announced.
In the 250-ml Tetra Pak package, 60 packages can be turned into 5 rolls of toilet paper 70 meters long, 400 can be made into small stools, and 4,000 are just a desk. Through the reprocessing of professional manufacturers, Tetra Pak can produce recycled paper, flooring, trash cans, table tennis rackets, garden fences, and more. In fact, some of the new trash cans on the Shanghai Bund and People’s Square were made from discarded Tetra Pak.
If you do not take recycling channels, these milk beverage paper packages obviously can only be burned or landfilled as garbage. For materials such as Tetra Pak that can be recycled 100%, it is a huge waste. Then people will ask, an environmental bench will consume more than 800 paper packaging, a large number of waste packaging come from?
At present, the waste in most parts of the country is mainly directed to the traditional waste acquisition system. In this system, residents have a traditional misunderstanding that they often think that “recyclable†means “can sell moneyâ€. Products such as Tetra Pak, toothpaste, shampoo bottles, and cosmetic packaging are small in size and light in weight. The value of a single sale is relatively low. If the garbage classification is not implemented, it is very inconvenient for scavengers to sort these valuable wastes. “Difficult to handle, low relative valueâ€, so in areas where garbage is not classified, packaging materials such as Tetra Pak, consisting of paper, aluminum foil, and polyethylene plastic, are often discarded by scavengers or simply Mixed in paper waste.
In places where waste is classified, a large number of waste packagings that are effectively classified can be sorted out from recyclable waste bins by cleaners or scavengers to achieve large-scale utilization.
And this also shows from another side that the environmental protection of food packaging still has enormous force that has not yet been released - once the community starts to implement a detailed waste separation policy, those packaging that we will be thrown away as waste will have more Opportunity to enter the recycling chain becomes wealth.
Acrylic Hangers
About Styles
About Materials
About Accessories
Acrylic Hangers
Acrylic Plastic Hanger, Acrylic Hanger, Acrylic Clothing Hangers,Acrylic Plastic Hangers, Acrylic Suit Hanger, Acrylic Coat Hanger, Acrylic Garment Hanger
EISHO CO.,LTD , https://www.eishohome.com