Milk transport tanker, Milk Tanker, Milk Tank Truck, production and marketing of milk tankers need to have production quality, versatile milk tanker can transport liquefied dairy and food transport. Economic security, there are a variety of configurations, a variety of options to meet the market demand.
CLW GROUP TRUCK Milk Tank Truck General Description
Milk transport tanker. Tanks with a food-grade stainless steel, the need for an external tank insulation to prevent the deterioration of milk, clean the tank internal requirements, no acute angle, generally need to add milk in each cabin cip (cleaning device). Transportation distance greater than 500km can consider a small refrigerator.
CLW GROUP TRUCK Milk Tank Truck Production qualification
Currently there are some manufacturers have production and marketing [1] milk truck qualifications. The so-called qualification, it is necessary to have a production process, technical standards milk tanker. Milk tank truck assembly: Overall speaking on three separate tank liner, made of 304 / 2B food grade stainless steel, plate thickness 3-4mm, middle part of the polyurethane foam insulation thickness of 80mm, Xinjiang and northwest areas ranging from 100-120mm, Tractor manhole part polyurethane foam is 60mm thick. Insulation effect 24 hours ± 2-3 ℃. Most external tank is 2mm thick 304 stainless steel plate. Interior part of a cleaning device, cleaning rod (or cleaning ball); cleaning tube (Φ38mm), four or more rotating cleaning nozzle, external pipes, a little pressure to automatically clean the tank liner. Second, there is the NDRC approved automobile public notice in general are: milk truck, truck and other liquid food to meet the needs of users listed.
CLW GROUP TRUCK Milk Tank Truck Has many uses
Tank material made of high quality aluminum and stainless steel, the tank and the tank can be installed insulation and cooling function, can transport liquefied dairy and food transport.
CLW GROUP TRUCK Milk Tank Truck Efficient
According to the needs of the body is set to multi-warehouse, ready dispensing a variety of media, pump into the pump out over the table, but the table,
Gravity over the table, and other functions.
Milk Tank Truck,Milk Transport Tanker,Milk Tanker,Fresh Milk Transport Truck,Fresh Milk Tank Truck CLW GROUP TRUCK , https://www.clwgrouptruck.net
Milk Tank Truck
The intelligent lighting constant temperature incubator is designed with several key components, including a top cover, a working chamber, a cooling and heating compartment, and a bottom chamber. These parts work in unison to ensure precise temperature control and effective illumination management. The user interface allows for easy operation and customization of the incubation process. Here’s how each function key works:
1. **Cycle Number Key**: Pressing this button toggles between displaying the current running cycle or the number of segments. Holding it for 2 seconds enters the cycle setting mode, and pressing it again for 2 seconds exits the setting mode.
2. **Set/Query Key**: Clicking this key initiates the query mode, allowing you to view the current running segment, set time, temperature, and humidity. To exit, simply press the same button. Holding it for 2 seconds switches to segment selection mode. Once a segment is selected, pressing the key enters the parameter setup mode. To exit the parameter settings, hold the key for 2 seconds. Note: If the cycle is set to 0 and the first cycle is also 0, the first program will always run.
3. **Decrease Button**: During parameter setup, this button decreases the value by one. Holding it for a few seconds allows continuous decrement.
4. **Increase Button**: This button increases the value by one when pressed. Holding it causes the value to increase continuously.
5. **Return (Back) Button**: In the parameter setup mode for each segment, this button allows you to navigate back to the previous parameter within the same segment only.
6. **Temperature Parameter Button**: Holding this button for 2 seconds accesses the internal parameter settings. Clicking it allows you to adjust internal parameters, and holding it for 2 seconds exits the setting mode.
7. **Lighting Key**: This key controls the internal lighting of the incubator. Pressing it turns the light on or off as needed.
8. **Power Button**: This key powers the controller on or puts it into shutdown mode. If no buttons are pressed for 30 seconds during any setting mode, the system automatically returns to normal operation.
Proper use of these keys ensures accurate and efficient operation of the incubator, making it ideal for various laboratory and research applications. Whether you're managing temperature, humidity, or lighting conditions, the intuitive design simplifies the process and enhances usability.