What is G7?

G7 (color control and correction method from drafting to printing) is a new concept developed by IDEAlliance, which is mainly aimed at the printing process based on the application of digital processes, spectrophotometry and computer direct plate making. It is simpler and more effective to practice ISO12647- 2 printing standards. Today, G7 can be applied to all four-color printing areas, including commercial printing, newspaper printing, even flexographic printing and digital printing. G7 needs to use the ink that meets the O2846-1 specification, so the solid color value (Lab) of the four main colors and three superimposed colors can be very close to the ISO requirements. Unlike the current use of dot gain (TVI) and solid density values ​​as printing targets to control color, G7 uses visual appearance methods to control the reproduction of gray and measure the density and chromaticity values ​​of neutral gray. From drafting to printing, the color expression effect is close to visual matching. The naming of G7, where 'G' refers to the correction technique based on gray balance, and '7' refers to the requirements for the seven main colors of ISO printing.

About the development of G7 certification in Greater China
In 2006, the "General Requirements for Applied Commercial Offset Printing" (GRACoL) committee in the United States actively invited different regions to conduct G7 (color control and correction methods from drafting to printing), and Hong Kong was invited to become one of the pilots. The Technology Research Center is responsible for leading and coordinating the G7 testing in Hong Kong.
The Printing Technology Research Center, established in 1999, is a technology transfer center for the printing industry in Hong Kong. The center has received strong support from the industry for this G7 test plan. There are six printing companies participating in this test, including China Business, Jinbei Printing, Yongjingtang, Zhongbian Printing, Starlight Printing and Changxing Printing. Li, M-Real, Gans, Toyo Ink and Dapeng Ink sponsored the test equipment and materials.
In addition, the Hong Kong Institute of Vocational Education, the Hong Kong Printing Industry Association and the Print Media Professionals Association are also supporting organizations. They also invited Mr. Joseph Pasky, a G7 accredited expert, and Mr. Lu Xianzong, the production director of Time Group, as project consultants for the test. .
The G7 test briefing was held on March 1, 2006 at the Hong Kong Institute of Vocational Education, which also marked the official launch of the G7 test in Hong Kong. The briefing was hosted by the center and invited printing company representatives, technical consultants, and college lecturers to participate in the test. There were 41 participants. In the briefing, Mr. Joseph Pasky first introduced the concept and characteristics of G7, and used the four-color printing machine and computer direct plate making machine (CTP) in the college to conduct trial printing on the spot to enhance the participants' understanding of G7.
After that, the center went to the inland factories of the six printing companies participating in the plan for testing. After the test is completed, the center integrates the data and summarizes the opinions of various printers on G7, and produces a test report. At the end of April 2006, representatives of the Center went to San Diego to participate in the ISO TC130 International Technical Conference and met with representatives of the GRACoL Committee.
At the meeting, the technical director of the center, Ms. Wen Hanying, published a 30-minute test result report. The attendees were very satisfied with the test results in Hong Kong. In fact, being able to have the opportunity to participate in large-scale international events and conduct technical exchanges with experts from various countries is indeed a valuable experience.
IDEAlliance Exclusive Regional Representative for Greater China
On July 1, 2007, the United States International Digital Enterprise Alliance (IDEAlliance) and the Printing Technology Research Center formally established a partnership to further promote the development of IDEAlliance's printing digitization and standardization in Greater China. The organization is named "Indian Alliance". According to the cooperation content signed by the two parties, this center has officially become IDEAlliance's exclusive regional representative in Greater China. The region includes Taiwan, Macau, Hong Kong and China, and the scope includes G7 printing color control method, US web offset printing specifications (SWOP® ), Apply the general requirements of commercial offset printing (GRACoL®), digital image submission requirements (DISC ™), virtual drafting (Virtual Proofing) and the related technologies carried out by IDEAlliance's Print Properties Working Group activity.
The Printing Technology Research Center has become the only institution that issues G7 recognized printing enterprise certificates in Greater China, and is responsible for verifying the qualifications of applicants for G7 recognized experts in Greater China. In addition, the center will establish an online membership system and provide IDEAlliance's industry technical guidelines for Chinese translation and related printing standard training. [next]
What is the G7 enterprise certification program?
The IDEAlliance G7 Enterprise Certification Program is designed for drafting companies and printing companies that have been trained to apply the G7 calibration method. The meaning of this accreditation is that the drafting company or printing company has a certain ability to use the most advanced technology, quality control methods and Produce high-quality commercial prints by standard.
G7 accredited enterprises all apply G7 color control and correction methods in the production process, so print buyers can ensure the quality of printing, and the G7 accreditation qualification issued by IDEAlliance is just showing the ability of the enterprise.
The G7 certification program relies on G7 accredited experts to provide training for companies to effectively use G7 methods for calibration systems and control of color quality. To ensure that printing companies continue to perform system calibration and quality control, the G7 certification program must reapply for certification once a year.
IDEAlliance is a G7 corporate certification body for American drafting companies and printing companies, and the Hong Kong Printing Technology Research Center has been appointed as the exclusive regional representative for Greater China. It is the only institution that certifies Greater China G7 recognized drafting companies and printing companies. The region includes China, Taiwan, Macau and Hong Kong.
The G7 Enterprise Certification Program has four levels of compliance:
1. G7 Grayscale:
Must meet NPDC and gray balance requirements
i. G7 Targeted: Must use ISO 12647 category paper (reach GRACoL / SWOP target value)
ii. G7 Targeted Relative: Non-ISO 12647 paper can be used (target value recalculated based on paper white)
Must meet G7 Grayscale requirements: NPDC and gray balance;
Must meet CMYK and RGB requirements;
Must be printed evenly
3. G7 ColorSpace:
Must meet G7 Grayscale requirements: NPDC and gray balance target values;
Must meet G7 Targeted requirements: CMYK and RGB target values;
Must meet the IT8.7 / 4 target value set by IDEAlliance;
Must be printed evenly
4.G7 Production Proof (for drafting companies):
Must meet ISO 12647-7 compliance requirements;
Must meet the other requirements set by IDEAlliance in IT8.7 / 4 and IDEAlliance 12647-7 Control Strip; and must meet the average of printed sheets [next]
How to become a G7 recognized company?
To become a G7 accredited enterprise, the applying company must be a member of Inlink ’s corporate network, and its qualification must be verified by a G7 accredited expert. The G7 accredited expert will first verify the company ’s equipment and equipment. The applying company needs to calibrate the printing press according to the G7 method And the drafting system to achieve the expected print quality, G7 accredited experts will evaluate the entire calibration and printing process. After successfully completing the entire process and confirming that the printed sheet meets the standard, IDEAlliance-China will confirm that the company has obtained the G7 accredited qualifications.
Steps to apply for G7 accreditation:
* Apply to become a corporate member of Inlink
* Assisted by G7 recognized experts to participate in the certification program
* List of experts: http: //TC.php
* Passed the printing process evaluation of G7 recognized companies
* Submit the application form, equipment and equipment verification form, other required documents and application fee to the Printing Technology Research Center
Evaluation process
* The printing company applying must fill in the equipment and equipment verification form, fill in the ink, paper, equipment (printing and drafting machine) and measuring instrument data used;
* Equipment verification form: http: //TC/Equipment%20Audit%20Form_TC.pdf
* With the assistance of G7 accredited experts, the printing company needs to perform the first adjustment printing test without linearization adjustment;
* According to the target color block on the printed sheet, hand-paint or use IDEAlink Curve / Curve 2 software to draw the neutral gray printing density curve, and then calculate the new target data;
* Using the new target data, after adjustment, conduct the second confirmation printing test;
* The enterprise will submit the application form, application fee and test print to the G7 accredited experts. The G7 accredited experts will verify and then submit to IDEAlliance-China for final review;
* If the assessment is successfully passed, the center will notify G7 accredited enterprises and G7 accredited experts, and the information of G7 accredited enterprises will be uploaded to this website and IDEAlliance website. .
Application fees for G7 accredited companies
* G7 accredited enterprises take the printing plant address as a benchmark. If the company has multiple plants, it must apply for each plant independently.
* G7 accredited enterprise certification fee: HK $ 3,700 *
G7 accredited company recertification
G7 accredited companies must apply for recertification every year. Certification requirements include:
* G7 accredited companies applying for recertification must be members of Inlink Corporation.
* Recertification must pass the assessment of G7 recognized experts.
* You must submit a graph of the neutral gray printing density (NPDC) curve before and after the adjustment or the P2P data data and related printed sheets applied to the IDEAlink Curve / Curve 2 software (the printing date must be listed).
* G7 accreditation fee for accredited companies: HK $ 1,300 per time / year *
* The above fees have not included the field training and certification fees of G7 recognized experts
Additional review
If the certification is G7 Professional, the Printing Technology Research Center will appoint an additional G7 recognized expert to monitor the entire certification process to ensure that the process is fair and just.
* Additional audit fee: HK $ 3,000 (excluding transportation and accommodation costs)

Plush Toy gifts account for a huge sales volume in the market. Many companies like to present plush toys as gifts to employees on New Year's Day. In the promotion of goods, there are also many salesmen, plush toys as promotional gifts to customers. Plush toys are the best choice for gift givers. Plush toy gifts, low cost, cute shape, exquisite workmanship, soft touch, not afraid of extrusion, easy cleaning, decorative, high safety, wide range of people and so on. So plush toys are good choices for children's toys, decorating houses and giving gifts to people.

Plush Toy Gift

According to consumer preferences, plush toys have the following hot categories:
1. According to the modeling sources of plush toys, they are divided into animal plush toys and cartoon character plush toys;
2. According to the length of plush toys, plush toys are divided into plush toys and super soft short plush toys;
3. According to the name of people's favorite animal, it is divided into plush toy bear, plush toy Teddy Bear and so on;
4, according to the different stuffed plush toys, divided into PP cotton plush toys and foam particles toys.

Fabric Display

1.Yarn-dyed cloth: the structure of the silk thread is well shaped. The appearance is similar to 5 pieces of satin and 8 pieces of satin. The density is better than 5 pieces of satin and 8 pieces of satin. Specifications are generally 75 * 100D, 75 * 150D and so on. The raw material of tinted cloth: it can be cotton, blended or polyester, or pure chemical fiber, which is formed by the different organization of the fabric. The product that lubricious ding bu makes popularity is wide, glossiness drape feels good, feel soft. Elastic colored butyl cloth "adopts polyester FDY dayou light 50D*DTY75D+ spandex 40D as the raw material, and USES satin weave weave in the jet loom. Because the warp thread adopts dayou light silk, the cloth surface has charm, and occupies a place in the recent fabric market with the advantages of lightness, smoothness, elasticity, comfort and luster. Polyester low-elastic silk is the raw material, the fabric structure USES satin plain grain to change the texture, woven on the air jet loom, grey cloth and then after desizing, pre-shrinking, softness and other treatment, the fabric permeability is particularly good, and feel soft and smooth, fabric width is 150cm. Design and color d set comfort, modern sense, artistic sense in one of the new fabrics

2. Non-woven fabrics: They are directional or random fibers. They are a new generation of environmental protection materials. They are moisture-proof, breathable, flexible, light, non-combustion-supporting, easy to decompose, non-toxic, non-irritating and colorful.

3. Twill: various twill fabrics are used to make the surface of the fabric show oblique lines formed by warp or weft floating lines. Twill is a medium thickness denim, there are two kinds of thick, fine (20-40 pieces), are using 2/1 left twill organization, texture than plain cloth slightly thick soft, front lines clear.

4, rabbit wool: rabbit wool fiber scales are relatively smooth. Soft sex, hygroscopicity, do not have a ball, also be rabbit flannelette material underwear rises in recent years one of main reasons. Rabbit hair belongs to amino acid protein fiber, which is similar to the composition and structure of human skin, has a good skin-friendly feeling, and has the function of maintaining animal life.

5, crystal super soft wool surface to be more delicate, feel better. High density between fibers, strong three-dimensional sense of hair, beautiful appearance, compared with the original super soft, glossiness is higher, feel more soft and thick, fine texture, environmental protection and so on.

6, wool fabrics have a velveteen, velvet, velvet, cluster flannelette, polyester silk fabrics flannelette flannelette, knitted fabrics, cotton fabrics flannelette velvet, velvet fabrics, warp knitted fabrics flannelette (new varieties, with 50 d polyester yarn and polyester FDY such DTY75D / 36 f/strong mesh as raw material, using the knitting chain structure, fabrics successively after scouring desizing, finalize the design, dyeing, softening, stenter stereotypes, such as deep processing), hole ring flannelette, super soft plush cloth (the latest varieties), short plush cloth (the latest varieties)


The company produces plush toys for many years, we have a professional designer, according to your design requirements, you only need to provide pictures (physical or plan) can be customized. All products can be added to the cloth label, can be embroidered on the trademark, so that each product has the company's information, has its own brand, gift more valuable, improve the visibility of the enterprise. Our products are exported to Japan, Europe, America and other countries. All raw materials are environmentally friendly, as people continue to pursue a high-quality lifestyle, plush toys in the application of modern home decoration more and more.

Plush Toy Gift

Plush Toy Gift,Custom Plush Toy Gift,Romantic Plush Toy Gift,Animal Plush Toy Gift

SHEN ZHEN HAO XIAN LONG TECHNOLGY.CO.,LTD , https://www.haoxianlongtoys.com