Correcting gray balance with RIP curve Through SID adjustment or other methods, the G7 CMY chart sample shows that the equipment has achieved gray balance. In this way, you need to find a common RIP curve for the CMY three colors and a separate curve for the single black. If you can't get the gray balance according to the equipment standard, you can refer to C, M and Y to find the RIP curve value. Assign values ​​to RIP or CTP devices Assign the new value to the RIP or calibration procedure from your worksheet. Some RIP devices need to enter the "after measurement" value instead of the "required" value, and some RIP will require a delta value. This method allows you to know how to correct the new target value accordingly. Remember, the new target value is the value that should be obtained for each curve point after correction. Napkin Paper,Serviette Napkin,Bathroom Tissue Paper,Premier Tissue Paper DONGGUAN YEE HUP TRADING CO,.LTD , https://www.yeehupack.com