Among all the features of screen printing, the durability of screen printing ink is the most important one. Moreover, screen printing is also a popular decoration method. Both solvent-based and UV-curable inks can impart rich colors to prints while also helping them to avoid being damaged during handling, as well as being subject to wear, fading, and other environmental factors. The use of screen printing inks with these functions in combination with highly durable substrates can bring us excellent prints with outstanding performance.

Many high-performance screen printing products have the characteristics of printing on metallic materials such as steel and aluminum. Metal logos, signage, appliance signs and decorations, containers and many other printed products, these products generally have many images and logos printed with screen-printing inks. But the production of such prints is indeed a huge challenge for screen printers that do not have the experience of printing on metal.

When you want to print on metallic materials, your homework must be done well. To understand the nature of the coatings on metallic materials, the production tolerances of these materials, and the best combination of ink/substrate, this plays a decisive role in the success or failure of printing. To make effective use of these materials, printers must first understand the main properties of these metal materials. In addition, screen printing inks suitable for different materials and different image requirements are also to be found.

Understanding metal substrates

Normally, when we talk about printing on metal, the metal we refer to is actually not an unprocessed metal material. Moreover, most screen printing processes involving metals are printed on coated or treated metal materials. The coating on metal is roughly divided into two types: thermoplastic materials or thermosetting resins.

Thermoplastic coating does not undergo chemical reactions during the drying of the substrate. The drying of the thermoplastic coating is completely achieved by evaporation or heating. During the heating process, the coating material can be fused with the metal. In the thermoplastic coating of metallic materials, it must be remembered that this coating does not resist the corrosion of high temperatures and aggressive solvents. In other words, the coating on the metal melts again if it encounters a high temperature or aggressive solvent during screen printing.

Thermosetting resin coatings are generally cured by chemical reactions called "polymerization" and/or "crosslinking." The coating can be dried by heating the coated metal with a high temperature for a long period of time. Thermoset coatings are resistant to high temperatures and re-melting, but also have high resistance to solvent corrosion and wear.

Resin systems that can be used as metal-coated base materials are ethylene (plastisol or solution systems), polyester or acrylic, and the like. The vinyl coating is thermoplastic. Although it is softer than the thermosetting coating and it is easier for the ink to adhere, the thermoplastic coating has little resistance to chemicals or abrasion, which makes them in multiple screen printing applications. It is restricted. Therefore, screen printers prefer to use metal substrates with thermosetting coatings.

Polyester and acrylic are the most common resins in thermosetting coatings. Thermosetting coatings, unlike flexible thermoplastic coatings, do not dissolve screen-printing inks, but instead have a stronger cross-linking effect, making it difficult for ink to adhere to the coating.

When ordering coated metal materials from a supplier, you must ensure that the materials you ordered are suitable for use on metals (acrylic, polyester, etc.), and make sure that the coating material contains The ink is adhering to a slip agent or other surfactant. If such surfactants are included, suppliers should recommend to printers cleaners that can safely remove these contaminants before printing.

Metal printing ink

Both solvent-based and UV-curable inks can be used to decorate coated metal materials, but the use of solvent-based inks is more common. Although advances in technology have allowed UV-curable inks to be used on a variety of metallic materials, the chemical composition and curing characteristics of the inks still limit its function, making it appear to be inferior to solvent-based inks.

Solvent-based inks for metal printing usually have two dry forms, one is air-dry (by evaporation) and the other is heat-cured (chemically hardened or cross-linked). Air-drying inks are generally formulated with vinyl, acrylic or lacquer effects. These inks do not react chemically during the drying process, so they are easily scratched and abraded, and have almost no resistance to solvents, gasoline, and/or aggressive cleaning solutions. If they are not completely dry, the ink film they produce will have the problem of ink agglomeration. Because metal is a relatively heavy substrate, if the phenomenon of ink agglomeration occurs on the metal, it will bring about certain problems. At present, many air-dried inks give prints good flexibility and excellent outdoor durability.

Solvent-based inks that use thermosetting drying instead of evaporative drying usually contain some form of epoxy, enamel, polyester, or acrylic (epoxy components are well suited for use in thermosetting inks that require high outdoor durability). All of these inks require long drying times at higher temperatures. After curing, the ink films they form are very hard, so they are stronger than air-dried inks. They not only resist the corrosion of solvents, gasoline and cleaning solutions, but also avoid scratches and wear. Of course, these inks are less flexible than air-dried inks, but they are suitable for hot embossing or deformation. If a proper curing and cooling process is performed prior to stacking, prints produced with thermosetting solvent inks will not exhibit agglomeration of the ink.

UV curable inks for metal printing are also divided into two types: cationic or free radical (acrylate). Cationic UV-curable inks contain an epoxy-based chemical composition. The curing speed of this ink system is slower than that of a conventional free radical system, which is generally based on acrylic resin. If properly processed, both ink systems can provide good outdoor durability for prints. Both cationic and radical UV curable inks are chemically reactive. During curing, they produce a stiff ink film. These ink films not only resist abrasion and chemical attack, but also have similar properties to thermoset solvent inks. The flexibility.

Whatever type of ink you choose for metal printing, this ink should be able to meet the specific performance requirements of the job. For example, the ink film formed by silk screen printing ink not only has a certain hardness to resist abrasion, scratches, ink accumulation and solvent erosion, but also has enough flexibility to allow people to bend and die-cut prints. And pressure bumps. There will not be an ink and a metal substrate that will satisfy all your production requirements. Instead, you will need to handle different coating materials while matching the ink system with different coating materials and the end use of the product.

For example, if the product is used internally, it is very suitable for epoxy type inks, and resin thermosetting inks are also available. If the product does not need to be solvent-resistant, air-drying solvent-based inks are sufficient. If prints need to have both corrosion resistance and outdoor durability, air-drying and epoxy-based solvent inks are not ideal, but other traditional thermoset or UV-curable inks can be used for this purpose. field. Your primary task is to ensure that the ink film adheres to the substrate after drying or curing, and that different inks are selected according to different materials.

To understand why the choice of ink is so important for metal printing, you must go back to the metal coating process. If the coating on the metal is thermoplastic, many inks will adhere to it. However, if the coating is thermosetting (all thermosetting in most screen printing), printing with any type of screen printing ink is difficult and one should monitor the entire production process closely and regularly.

Electric 3-stage Lifting Column the speed is 35mm/S,more faster more than 2-stage Lifting Column .Can be used on many desk ,like Single Motor Standing Desk, One Leg Standing Desk , Two Legs Standing Desk ,Three Legs Standing Desk,Four Legs Standing Desk. TV Lift / Cart .

Standing Desk
CONTUO Electric Height Adjustable Desk take very big market share both in China and abroad market, they are selling very well in the overseas market, like One Leg Standing Desk ,Two Leg standing Desk,Three Leg standing Desk,Four Leg standing Desk,Australian,Germany,Dubai,Finland,Iran,  Italy, Argentina, Egypt,India, Turkey, India, ,etc.so many countries and areas. Also we have many Hand Crank Desk , Standing Desk Converter , Movable Standing Desk, Lifting Column , Tv Lift / Cart win high praise from customers both in quality and prices. So, all respected customers, please come to CONTUO to choose Electric Height Adjustable Desk you need.


3-Stage Lifting Column

3-Stage Lifting Column,3 Stages Metal Lifting Column,Electric Lift Column,Electric Lift Table Columns

Shaoxing contuo Transmission Technology Co.,Ltd , http://www.contuodesk.com