Three to four hours after the completion of the tattoo, clean the tattoo with warm water, use a bath, then dry with a sanitary towel, keep dry, apply the care cream, after cleaning every day, apply once.
Tattoo attention points - maintenance Tattoo Care,Tattoo Aftercare,Professional Tattoo Aftercare,Tattoo Ointment DONGGUAN VOLES COMMODITY CO., LTD , https://www.volesvip.com
1. After completing the tattoo, clean the whole part with color toner, apply color anti-inflammatory gel, then wrap the bandage and keep it for at least two hours;
2. Undo the bandage, clean the tattoo with color toner and blot the water dry;
3, apply color anti-inflammatory gel, and wipe off the excess, color anti-inflammatory gel four times a day;
4, keep the tattoo part moist and breathable, no need to bandage;
5. Swimming or long time immersion in water is prohibited within one week;
6. Avoid excessive exposure to sunlight for one month;
7, can not scratch or tear off the scab part;
8, can be used to pat or wipe alcohol method to reduce itching;
9. Wear loose clothing.
The wire and cable industry is experiencing rapid growth, but many companies are still focused on quantity rather than quality. This highlights the urgent need to improve product quality. To ensure the safety and longevity of cables, it's essential to implement advanced quality control measures, including heat aging performance testing.
This test is typically conducted in a gas aging chamber, where two key parameters are controlled: temperature and air exchange. While temperature is often closely monitored and considered critical for calibration, the importance of air exchange is frequently overlooked. However, air exchange plays a vital role in the aging process. When the wind speed is high, more air is exchanged, leading to better convection and a more pronounced aging effect. Conversely, lower wind speeds result in less air exchange and slower aging.
To maintain consistent and reliable results, standards such as JB/T4278.6-2011 "Verification Method for Natural Ventilation Heat Aging Test Chamber for Rubber and Plastic Cables" must be followed. According to this standard, the air inside the chamber should be completely exchanged 8 to 10 times per hour at the specified test temperature. This ensures that the aging process remains effective and meets required performance levels.
In summary, while the wire and cable industry is expanding quickly, focusing on quality through proper testing methods like heat aging is crucial. Paying attention to both temperature and air exchange helps ensure that products meet safety and durability standards, which is essential for long-term success in the market.